In TransitUsed
2002
CNC Turning
H.H. Roberts (Ann Yang)
DY-510 × 2000
ControllerANILAM 4200T
Key Specs (mm)
Max Ø:340
Max L:1650
CNC Machinery · Machine City · Mohali
Browse used CNC turning centers — slant bed, live tooling, Fanuc/Siemens/Mitsubishi. Max turning dia from 200–600 mm. Pan-India availability.
A CNC Turning Center (also called a CNC lathe) rotates the workpiece against a stationary cutting tool, making it the essential machine for producing shafts, pins, bushings, flanges, and any rotationally symmetric component. Modern slant-bed turning centers offer superior chip evacuation over older flat-bed designs, and the CNC control enables multi-pass turning, threading, grooving, and drilling in a single setup. Machines with live tooling (driven turret tools) can perform radial drilling and milling on the part without transfer to a machining center, dramatically reducing cycle time and fixturing cost.
The primary specifications that define a CNC turning center's capability are maximum turning diameter (the largest OD that can be machined — typically 250–500 mm for Indian automotive and general work), maximum turning length (the longest shaft the machine can handle, often 500–2,000 mm), and spindle bore diameter (which limits the bar stock size that feeds through the spindle). The CNC controller is equally critical: Fanuc 0T, 21T, and 18T are the most common on Japanese imports, with Siemens 840D on European machines and Mitsubishi M64 on certain Japanese brands. Slant-bed geometry keeps chips away from the guideways for longer machine life and easier chip management.
Machine City stocks used CNC turning centers from brands including Mazak Quick Turn, Doosan Puma, DMG Mori CLX/CTX, Haas ST, Okuma LB, and Indian makes such as BFW and HMT. A used turning center at 40–60% of new cost is a practical upgrade path for shops running manual lathes or older CNC machines with limited controller capability.
Why Choose Us
Since 2009, over 2,000 machines traded. Every transaction built on the same standard of straight dealing.
Machines sourced from Canada, USA, and Singapore — not reshuffled domestic inventory. Fresh-condition equipment at honest prices.
We coordinate logistics from our Mohali yard. Our transport network reaches buyers across every major industrial city in India.
Live Listings
Buyer’s Guide
Check hydraulic chuck clamp force — low force indicates a worn or leaking chuck cylinder. Spin the spindle at multiple speeds and listen for bearing rumble. Inspect the spindle nose taper for dings or galling.
Confirm both the swing over bed (maximum diameter in the open space) and the max turning diameter over the cross slide (maximum diameter of the actual cut zone). These two figures together define what you can machine.
For shaft work, verify the max turning length or distance between centers accommodates your longest part including clamping clearance. Ensure the tailstock quill extends and retracts cleanly.
Run all driven tool positions at rated speed and verify each turret index position is correct. Check for backlash in the turret indexing mechanism — a sloppy turret will produce positional errors on radial features.
Z is the longest travel axis and typically shows wear first on high-hour machines. Check Z-axis backlash with a dial indicator and inspect the guideways for scoring or wear marks near the spindle end.
FAQ
Explore Related
Vertical Machining Center (VMC)
Browse used VMC machines — BT40/BT50 spindle, Fanuc/Siemens/Mitsubishi controlle
Horizontal Machining Center (HMC)
Browse used HMC machines — horizontal spindle, APC, BT50/HSK63 taper, Fanuc/Siem
CNC Vertical Turret Lathe
Browse used CNC VTL machines for large-diameter turning — flanges, rings, housin
Drill Tap Center
Browse used drill tap centers — high-speed CNC for drilling & rigid tapping. BT3
Tell us your requirement — capacity, controller preference, budget — and we will match you to available stock or alert you when the right machine comes in. We respond personally to every enquiry.
← Back to all CNC MachineryReal photographs, accurate condition descriptions, and known issues disclosed upfront. No inflated specifications.
Every enquiry gets a direct response from our team — no automated replies, no call queues. WhatsApp or call; we answer.
For machines in our Mohali yard, arrange a visit before committing. See the machine under power, ask every question.
Index through all turret stations and verify repeat positioning with a dial indicator. Repeat accuracy should be under 0.005 mm for precision work; any value above 0.01 mm indicates worn turret indexing.
Confirm no major drive or servo alarms. Request the parameter backup file. Verify program memory is sufficient for your part programs and that macro B (or equivalent) is enabled if you use macros.
If you plan to run bar stock production, verify the spindle bore diameter matches your typical bar diameter, and that the machine can electrically interface with a bar feeder (spindle-stop signal, etc.).
